- Money Saving Mom® - http://moneysavingmom.com -
Do-It-Yourself: How to Texturize Your Walls
Posted By Crystal Paine On October 16, 2012 @ 4:01 pm In LITE Feed (non-deal) Posts | 13 Comments
Guest post from Jenny of Suscipio 
When our family moved into our current home almost eight years ago, it was in excellent condition, just very outdated. The house was built in 1984 when brown was apparently very popular. It had brown carpet, brown paneling, brown built-in book shelves… you get the picture.
One of the last rooms to be updated in our home was the dining room. Although it is one of the most used rooms in our home and one of the central rooms, it was one of the last I got around to. Why? Because I hate to remove wallpaper and it had wallpaper.
I did not want to remove the old wallpaper and then smooth the walls and make the necessary repairs to cover any and all blemishes. One day while visiting my neighbor, I asked about her textured walls in her kitchen and dinning room. She explained how simple it easy it was to create beautifully texturized walls.
Materials you will need:
I started by removing the old wallpaper using some solution I bought at the home improvement store. After the walls dried, I painted them a khaki color.
Next, I started applying the compound. Depending on how you want your walls to look — prominently raised edges of compound or more of a smeared on look — depends on how much and with what pressure you apply the compound. I started on a wall that would be behind an armoire to practice.
Scoop out some compound using your putty knife and scrape it on the wall. You may want large semi circle motions or just swipes here and there. I chose swipes with some pressure, but not too much. The more pressure you apply, the deeper the compound grooves will be.
Per my experience, I would not make a very raised and grooved wall in a place where people spend some down time, like by a telephone or the bathroom toilet. The raised ridges of compound will be picked off by bored fingers.
I let the compound dry overnight, and the next day, I mixed together a 2- to-1 ratio of glaze. For our dinning room I used 2 parts Mocha to 1 part clear.
Using a balled-up old t-shirt, I dipped it in the glaze, wiped off the excess and rubbed it over the wall, paying special attention to areas I wanted to look a little darker. The glaze gets darker in the ridges and swipe grooves than on the rest of the wall.
I did this same technique in a laundry room bathroom that had pretty rough looking wall after wallpaper removal. I painted on a can of grayish taupe I found on the ‘oops!’ shelf at my home improvement store, applied the compound and used a metallic like glaze.
Both projects were pretty quick, very easy, and turned out great.
Jenny seriously likes ice water, Lawrence Welk, marching bands, and Nutella on a spoon. She saves her loves for God, her husband of 20 years, and their 7 children — whom she homeschools. She blogs at Suscipio .
Article printed from Money Saving Mom®: http://moneysavingmom.com
URL to article: http://moneysavingmom.com/2012/10/do-it-yourself-how-to-texturize-your-walls.html
URLs in this post:
 Suscipio: http://www.suscipio4women.com
Copyright © 2009 Money Saving Mom. All rights reserved.